Viewing A Stream; Using Your V700 System As A Computer Monitor - Polycom V500 Getting Started Manual

Getting Started Guide for the V Series

Viewing a Stream

Using Your V700 System as a Computer Monitor

28
Before you view the streamed conference, you need to:
• Install the QuickTime player on your computer.
• Obtain the IP address of the video conferencing system and the password
(if any) from the conference organizer.
• Verify that you are using a network that allows multicast packets.
To view a streaming conference:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the video conferencing system's web
interface.
3. Click View a Meeting.
4. If prompted, enter the user name and password provided by the
conference organizer.
To stop viewing the streaming conference:
 Close the web browser.
If you have a V700 system, you can save space in your office or conference
room by also using the V700 XGA display as your computer monitor.
Typically, you do not need to change the factory defaults for these settings.
However, if you do need to access the monitor settings, use the buttons on the
front of the V700 monitor. Press MENU, then press SELECT and ADJUST as
needed to change the settings.
© Polycom, Inc.