Streaming A Conference To The Web (V700 System Only); Starting A Stream - Polycom V500 Getting Started Manual

Streaming a Conference to the Web (V700 System Only)

Starting a Stream

© Polycom, Inc.
To transfer a call:
1. While in a call, press
access the tone pad.
2. Press Dot on the remote to activate flash hook. The first far-site
system is placed on hold.
3. Wait for a dial tone, then dial the extension of the far-site system to which
you want to transfer the call. The call connects both audio and video
between the local system and the second far-site system. The first far-site
system is still on hold.
4. Hang up the near-site system. The two far-site systems are now
connected in a call with audio and video, if the capabilities are present.
Your V700 system may be configured to allow you to make point-to-point calls
available for others to view using a web browser. Users who view the stream
need to know the address of the video conferencing system and the system's
room password (if any).
To stream a conference:
1. Select System from the Place a Call screen.
2. Select Utilities from the System screen.
3. Select Web Streaming from the Utilities screen.
4. Select the Start Streaming option to begin streaming.
You can start the stream before or during a video call.
To stop streaming a conference:
1. Select System from the Place a Call screen.
2. Select Utilities from the System screen.
3. Select Web Streaming from the Utilities screen.
4. Clear the Start Streaming option to stop the stream.
Getting Started Guide for the V Series
on your Polycom system remote control to
27