Refreshing Global Directory Entries; Participating In Calls With Multiple Sites; Supplying A Password For Bridge Calls - Polycom V500 Getting Started Manual

Refreshing Global Directory Entries

Participating in Calls with Multiple Sites

Supplying a Password for Bridge Calls

© Polycom, Inc.
The global directory entries are periodically refreshed on systems registered to
the Polycom Global Directory Server. You can also manually refresh the global
directory entries on your system.
To manually refresh global directory entries:
1. Select Directory from the Place a Call screen.
2. Navigate to the red Polycom logo in the top right corner of the screen.
If you do not see a red Polycom logo in the top right corner of the screen,
your system is not registered with the Polycom Global Directory Server.
Contact your system administrator for more information.
3. Select the logo and choose Refresh.
Your system may be configured to participate in multipoint calls. During a
multipoint call, multiple sites can see and hear each other. You can also share
content in a multipoint call, just as you can in a point-to-point call.
Your V500 system might be configured to participate in multipoint calls using
IP, SIP, or ISDN. Your V700 system might be configured to participate in
multipoint calls using IP or SIP.
You can initiate multipoint calls with your V Series system if your system has been
configured to use Polycom PathNavigator™.
Bridges such as the Polycom MGC
password to join a conference. Depending on your system configuration, you
can set up the system to enter the meeting password for you.
If you need to generate touch tones (DTMF tones), press
control, then use the remote control keypad.
Getting Started Guide for the V Series
sometimes require you to enter a
™
on the remote
19