Lag Screw Installation; Canopy Installation - Casablanca Reverie Owner's Manual

NOTE: Th is step is required only under two conditions: If
the fan weighs 36 lbs. or more or if the existing ceiling fi xture
outlet box needs to be modifi ed for a ceiling fan application
(for example, if the house is not new construction and you
are replacing an existing light fi xture). We recommend
that the ceiling box be of suffi cient capacity to support the
weight of the fan and light fi xture under any conditions. If
in doubt whether you need to install the lag screw, consult
a qualifi ed electrician.
Step 2. With the large washer attached, pass the lag screw
(Pack A) through the center hole of the crossbar mounting
bracket and screw into the guidehole. Tighten until the
outlet box is mounted fi rmly to the beam. Th is box must
be secured to the ceiling fi rmly.
CANOPY HARDWARE (not to scale)
Step 3. Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2 1 /
2
Pack B) and lock washers provided with your Casablanca
fan. Tighten using the provided screwdriver until snug
against the ceiling.
NOTE: On sloped ceilings, align the canopy opening with
the top or peak of the room.

LAG SCREW INSTALLATION

CANOPY INSTALLATION

Canopy
Canopy Hatch
" long canopy screws (Screw
R
EVERIE
Screw Pack B:
Canopy Screws and
Lock Washers (5)
Feed outlet box
wires through
canopy opening
™
Canopy
Lock Washer
Canopy Screw
5