Lag Screw Installation; Canopy Installation - Casablanca MIDDLEBURY Owner's Manual

Hide thumbs

Table of Contents

NOTE: We recommend that the ceiling box be of

sufficient capacity to support the weight of the fan and

light fixture under any conditions. If in doubt whether,

consult a qualified electrician.

Step 2. With the large washer attached, pass the lag screw

(Pack A) through the center hole of the crossbar mounting

bracket and screw into the guide hole. Tighten until the

outlet box is mounted firmly to the beam. This box must

be secured to the ceiling firmly.

CANOPY HARDWARE (not to scale)

Step 3. Attach the canopy to the crossbar mounting bracket

with three of the 8-32 x 2

" long canopy screws and lock

washers (Pack B) provided with your Casablanca fan.

Tighten using the provided screwdriver until snug against

the ceiling.

NOTE: On sloped ceilings, align the canopy opening

with the top or peak of the room.