Lag Screw Installation (Required); Canopy Installation - Casablanca C19xxxK Owner's Manual

LAG SCREW INSTALLATION (REQUIRED)

Step 2. Pass the lag screw through the center hole
of the crossbar mounting bracket and screw into the
guide hole. Tighten until the outlet box is mounted
firmly to the beam. This box must be secured to the
ceiling firmly.
CANOPY HARDWARE (not to scale)
Canopy Hatch
Canopy
Step 3. Attach the canopy to the crossbar mounting
bracket with three of the 8-32 x 2
and lock washers provided with your Casablanca fan.
Tighten using the provided screwdriver until snug
against the ceiling.
NOTE: On sloped ceilings, align the canopy opening
with the top or peak of the room.

CANOPY INSTALLATION

Canopy Screws and Lock Washers (5)
/ " long canopy screws
1
2
Heritage II
TM
CANOPY
Phillips
Screwdriver
CANOPY SCREWS
LOCK WASHERS
9