Lag Screw Installation (Optional); Canopy Installation - Casablanca La FLeur Owner's Manual

LAG SCREW INSTALLATION (OPTIONAL)

NOTE: This step is required only under two conditions:
If the fan weighs 35 lbs. or more (which does not pertain
to this fan) or if the existing ceiling fixture outlet box needs
to be modified for a ceiling fan application (for example, if
the house is not new construction and you are replacing an
existing light fixture). We recommend that the ceiling box be
of sufficient capacity to support the weight of the fan and light
fixture under any conditions. If in doubt whether you need to
install the lag screw, consult a qualified electrician.
Step 2 (optional). With the large washer attached, pass the
lag screw through the center hole of the crossbar mounting
bracket and screw into guide hole. Tighten until outlet box
is mounted firmly to beam. This box must be secured to the
ceiling firmly.
CANOPY HARDWARE
(not to scale)
Canopy Hatch
Step 3. Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2 /
1
2
washers provided with your Casablanca fan. Tighten using the
provided screwdriver until snug against the ceiling.
NOTE: On sloped ceilings, align the canopy opening with
the top or peak of the room.

CANOPY INSTALLATION

Canopy
long canopy screws and lock
"
L F
a
Lag Screw
Canopy Lock Washer (5)
Feed outlet box wires
through canopy opening
™
Leur
Large Washer
Canopy Screw (5)
Canopy
Lock Washer
Canopy Screw
5