Lag Screw Installation (Optional); Canopy Installation - Casablanca Hanover Owner's Manual

LAG SCREW INSTALLATION (OPTIONAL)

NOTE: Th is step is required only under two conditions: If
the fan weighs 36 lbs. or more (which does not pertain to
this fan) or if the existing ceiling fi xture outlet box needs
to be modifi ed for a ceiling fan application (for example,
if the house is not new construction and you are replacing
an existing light fi xture). We recommend that the ceiling
box be of suffi cient capacity to support the weight of the
fan and light fi xture under any conditions. If in doubt
whether you need to install the lag screw, consult a qualifi ed
electrician.
Step 2 (optional). With the large washer attached, pass the
lag screw (Pack A) through the center hole of the crossbar
mounting bracket and screw into guide hole. Tighten until
outlet box is mounted fi rmly to beam. Th is box must be
secured to the ceiling fi rmly.
CANOPY HARDWARE (not to scale)
Step 3. Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2 1 /
B) and lock washers provided with your Casablanca fan.
Tighten using the provided screwdriver until snug against
the ceiling.
NOTE: On sloped ceilings, align the canopy opening with
the top or peak of the room.

CANOPY INSTALLATION

Canopy Hatch
Canopy
" long canopy screws (Pack
2
H
ANOVER
Pack B:
Canopy Screws and
Lock Washers (5)
Feed outlet box
wires through
canopy opening
™
Canopy
Lock Washer
Canopy Screw
5