Lag Screw Installation; Canopy Installation - Casablanca ALESSANDRIA Owner's Manual

Hide thumbs

Table of Contents

NOTE: This step is required only under two conditions:

If the fan weighs 36 lbs. or more or if the existing ceiling

ﬁ xture outlet box needs to be modiﬁ ed for a ceiling

fan application (for example, if the house is not new

construction and you are replacing an existing light

ﬁ xture). We recommend that the ceiling box be of

sufﬁ cient capacity to support the weight of the fan and

light ﬁ xture under any conditions. If in doubt whether

you need to install the lag screw, consult a qualiﬁ ed

electrician.

Step 2. With the large washer attached, pass the lag

screw through the center hole of the crossbar mounting

bracket and screw into the guide hole. Tighten until

the outlet box is mounted ﬁ rmly to the beam. This box

must be secured to the ceiling ﬁ rmly.

CANOPY HARDWARE (not to scale)

Canopy Hatch

Step 3. Attach the canopy to the crossbar mounting

bracket with three of the 8-32 x 2

and lock washers provided with your Casablanca fan.

Tighten using the provided screwdriver until snug

against the ceiling.

NOTE: On sloped ceilings, align the canopy opening

with the top or peak of the room.