Lag Screw Installation; Canopy Hardware; Canopy Installation - Casablanca Key Largo II Manual

Table of Contents

Step 2. Pass the lag screw through the center hole of the

crosbar mounting bracket and screw into guide hole. Tighten

until outlet box is firmly mounted to beam. This box must

be firmly secured to the ceiling. We recommend that the

ceiling fixture outlet box be of sufficient capacity enabling

it to support the weight of fan and light fixture under any

conditions.

CANOpY

HATCH

Step 3. Attach the canopy to the crossbar mounting bracket

with three of the 8-32 x 2

lock washers. Tighten the screw firmly by hand only with the

provided screwdriver..

note: On sloped ceilings, align the

canopy opening towards the top or

room peak.