Lag Screw Installation; Canopy Installation - Casablanca Bungalow Owner's Manual

NOTE: We recommend that the ceiling box be of suffi cient
capacity to support the weight of the fan and light fi xture
under any conditions. If in doubt, consult a qualifi ed
electrician.
Step 2. With the large washer attached, pass the lag screw
(Pack A) through the center hole of the crossbar mounting
bracket and screw into the guidehole. Tighten until the
outlet box is mounted fi rmly to the beam. Th is box must
be secured to the ceiling fi rmly.
CANOPY HARDWARE (not to scale)
Step 3. Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2 1 / " long canopy screws and lock
2
washers (Pack B) provided with your Casablanca fan.
Tighten using the provided screwdriver until snug against
the ceiling.
NOTE: On sloped ceilings, align the canopy opening with
the top or peak of the room.

LAG SCREW INSTALLATION

CANOPY INSTALLATION

Canopy Hatch
Canopy
B
UNGALOW
Canopy Screws and
Washers (5)
Feed outlet box
wires through
canopy opening
™
Pack B:
Canopy
Lock Washer
Canopy Screw
5