Configuring Live Feed Displays - HIKVISION DS-7300HFI-ST Series User Manual

User's Manual of DS-7300HFI-ST Series DVR
Next Set of Display: Click to view the next set of display. In a 2x2 mode, this will show the next four
display. In a 3x3 mode, this will show the next nine display.
Note:
In order to use auto-switching of channels, the dwell time must be configured in the Display
Configuration menu.
Note:
After 20 seconds of inactivity, the DVR will automatically exit out of the Display menu and go back into
the Live Feed mode.
Note:
The Lock Main Menu setting is selected by default, meaning the Admin password must be enter to exit
out of the Live Feed into the Main Menu..

Configuring Live Feed Displays

Live Feed displays can be customized to your own needs. These settings can be accessed by entering the
Display Configuration menu, shown in Figure 17.
To customize display settings:
1. Enter the Display Configuration menu by going to Main Menu > System Configuration >
Display Configuration.
2. The settings available to configure for each video output includes:
 Video Output: Designates the output including HDMI, VGA, Main CVBS and Spot
Output1.
 Screen Configuration: Designates the display mode for Live Preview.
 Sequence Dwell Time: Set the time to dwell between switching of channels when
Start Sequence is selected in Live Preview.
Figure 17 Display Configuration Menu
29