Table of Contents
Advertisement
User's Manual of DS-7300HFI-ST Series DVR
2. Select the OK button to restore factory defaults or select the Cancel button to return to the
previous menu.
Note:
Network information such as IP address, subnet mask and gateway will not be restored.
Exporting & Importing Configuration
Configuration information from your DVR can be exported to a USB storage device and imported into
another DVR. This will allow you to efficiently setup the same configuration on numerous DVRs.
To export DVR configuration:
1. Enter the Export/Import Configuration menu, shown in Figure 66 by going to Main Menu >
Maintenance > Export/Import Configuration.
2. Connect the USB storage device to a USB port on the DVR.
Figure 65 Factory Default Menu
Figure 66 Import/Export Configuration Menu
79
Advertisement
Table of Contents
