HIKVISION DS-7300HFI-ST Series User Manual page 13

User's Manual of DS-7300HFI-ST Series DVR
USB Ports: Connects USB mouse or USE flash memory devices.
3.
4. Status Indicators:
• Alarm: Alarm indicator turns red when a sensor alarm is detected.
• Ready: Ready indicator turns blue when DVR is functioning properly.
• Status: Status indicator turns blue when DVR is controlled by an IR remote. Indicator
turns red when controlled by a keyboard and purple when IR remote and keyboard is
used at the same time.
• HDD: HDD indicator blinks red when data is being read from or written to HDD.
• Modem: Reserved
• TX/RX: TX/RX indictor blinks blue when network connection is functioning properly.
• Guard: Guard indicator turns blue when the device is armed, off when the device is
unarmed. The arm/disarm state can be initiated by pressing and holding on the ESC
button for more than 3 seconds in Preview mode.
5. Alphanumeric Buttons:
include:
 Switching to the corresponding channel in Preview or PTZ Control mode.
 Inputting numbers and characters in Edit mode.
 Switching between different channels in Playback mode.
Control Buttons:
6.
 ESC Button: The ESC button is used to escape to the previous menu and to arm/disarm
the DVR in Preview mode.
 REC/SHOT Button: The REC/SHOT button is used to enter the Quick Schedule
Recording interface. If used when controlling a PTZ, pressing the REC/SHOT button
and then a Numeric button will call a PTZ preset.
 PLAY/AUTO Button: The PLAY/AUTO button is used to enter the Playback menu. It
is also used to turn audio on/off in the Playback menu and auto scan in the PTZ
Control menu.
 ZOOM+ Button: The ZOOM+ button is used to zoom the PTZ camera in when in the
PTZ Control menu.
 A/FOCUS+ Button: The A/FOCUS+ button is used to adjust focus in the PTZ Control
menu. It is also used to switch between input methods (upper and lowercase alphabet,
symbols and numeric input). It can also be used to clear entire masked areas, such as
in the Motion Detection and Privacy Mask menus.
 EDIT/IRIS+ Button: The EDIT/IRIS+ button is used to edit text fields. When editing
text fields, it will also function as a Backspace button to delete the character in front
of the cursor. On checkbox fields, pressing the EDIT/IRIS+ button will tick the
checkbox. In PTZ Control mode, the EDIT/IRIS+ button opens up the iris of the
camera. In Playback mode, it can be used to generate video clips for backup.
 MENU/WIPER Button: Pressing the MENU/WIPER button will return the user to the
Main menu (after successful login). Pressing and holding the button for 5 seconds will
turn off audible key beep. The MENU/WIPER button will also bring up Sensitivity
Interface settings. In PTZ Control mode, the MENU/WIPER button will start wiper
(if applicable).
 F1/LIGHT Button: The F1/LIGHT button when used in a list field will select all items
on the list. In PTZ Control mode, it will turn on/off PTZ light.
 F2/AUX Button: The F2/AUX button is used to cycle through tab pages. It will also
bring up the Channel & OSD Position settings.
 MAIN/SPOT/ZOOM- Button: The MAIN/SPOT/ZOOM- button is used to switch to
the control of spot output. In PTZ Control mode, it can be used to zoom the camera
Alphanumeric buttons used in various menus of the DVR. Some uses
13