Viewing System Logs - HIKVISION DS-7300HFI-ST Series User Manual

User's Manual of DS-7300HFI-ST Series DVR
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. Click the New Folder button to create a new folder or the Delete button to delete a file/folder.
5. Select the location where you would like the configuration to be stored on the USB storage
device.
6. Click Export to export a configuration file to USB storage device. The configuration file will be
named devCfg.bin.
7. Click the Exit button to exit out of the Export/Import Configuration menu.
To import DVR configuration:
1. Enter the Export/Import Configuration menu, shown in Figure 66 by going to Main Menu >
Maintenance > Export/Import Configuration.
2. Connect the USB storage device to a USB port on the DVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. Select the configuration file. The configuration file is named devCfg.bin.
5. Click the Import button.
6. Click the Exit button to exit out of the Export/Import Configuration menu.

Viewing System Logs

Many events of your DVR are logged into the system logs. To access the system logs and search for these
events:
1. Enter the System Logs menu, shown in Figure 67 by going to Main Menu > Maintenance >
System Logs.
2. Select the date from the Calendar to search for system logs in. The current system date is
displayed in the upper left corner of the menu.
3. Select the log type using the Search Type drop down list. Four log types are available: Alarm,
Exception, Operation, Information and ALL
4. Click the Search button. The search results will be displayed in a list on the right side of the menu
(Figure 68). If there are more than 2000 entries, click the Prev Page or Next Page button to
display more entries.
Figure 67 System Logs Menu
80