Table of Contents
Advertisement
User's Manual of DS-7300HFI-ST Series DVR
Backing up Video Clips
Video clips can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer.
Selecting Video Clips
Video clips can be selected for backup in the Playback Interface using the controls found in the Mark Clip
For Backup panel, shown in Figure 35.
The controls found in the Mark Clip for Backup panel includes:
•
Start Clip Button: Mark the starting point for the video clip.
•
Stop Clip Button: Mark the ending point for the video clip.
Play Clip Button: Play the selected video clip.
•
Save Clip Button: Save the selected video clip to the HDD.
•
•
Clear Clip Button: Clear the selected video clip.
To select video clips in the Playback Interface:
1. Enter the Playback Interface, shown in Figure 36 by going to Main Menu > Playback.
2. Search for the recorded files that you would like to select video clips from (See Searching for
Recorded Files on page 74). Video clips can only be selected in single playback mode.
3. Select the starting position of the video clip by clicking the desired location on the blue
recordings bar.
4. Click the Start Clip button.
Figure 35 Mark Clip For Backup Controls
Figure 36 Playback Menu
48
Advertisement
Table of Contents
