Configuring E-Mail Settings - HIKVISION DS-7300HFI-ST Series User Manual

User's Manual of DS-7300HFI-ST Series DVR
Bad video signal: if selected, trigger action when video signal is abnormal.
•
• Video Output Standard Mismatch: If selected, trigger action when video output standard
does not match.
Video Exception: If selected, trigger action when an exception such as distorted video is
•
detected.
• Recording exception: If selected, trigger action when recording exception is detected.
3. Select the Actions to take when the exception is detected. More than one action can be selected.
The actions available includes:
• Sound Audio Warning: DVR will sound an audio warning if exception is detected.
• Notify Surveillance Center: DVR will notify surveillance center if exception is detected.
Send Email: DVR will send an email out to the designated recipients if exception is detected.
•
• Trigger Alarm Output: DVR will trigger alarm output if exception is detected. Selecting
this option will enable the Alarm Output list, where the output to trigger can be selected.
4. Select the Save button to save the exception settings and select Exit to return to the previous
menu. Selecting the Exit button without clicking Save will quit out of the menu without saving
settings.

Configuring E-mail Settings

If you would like to have the DVR send out e-mails when certain events are detected or exceptions have
been triggered, you must first setup the e-mail settings.
To setup e-mail settings:
1. Enter the Email Configuration menu, shown in Figure 52 by going to Main Menu > System
Configuration > Email Configuration.
2. Under Server Information, enter all pertinent email information, including:
Server Authentication: Enable if email server requires authentication. Enabling Server
•
Authenticating will enable the User Name and Password fields.
• User Name: User name to use for server authentication.
Password: Password to use for server authentication.
•
• SMTP Server: Address for SMTP server.
Figure 52 Email Configuration Menu
63