Table of Contents
Advertisement
User's Manual of DS-7300HFI-ST Series DVR
Enable Audio: Enable or disable audio output for the selected video output.
Output Format: Select the output standard to NTSC or PAL, which must be the
same with the video input standard.
Device Name: Edit the name of the device.
Device No.: Edit the number of the device.
Current Resolution: Select the appropriate resolution of the video output.
Mouse Pointer Speed: Set the speed of mouse pointer and 3 levels are configurable.
Event Output: Designates the output to show event video.
Event Dwell Time: Set the time to dwell between switching of channels when events
occur.
Setting Camera Order
Setting the camera order allows you to logically position cameras for more efficient monitoring of your
own individual location.
To set the camera order:
1. Enter the Display Configuration menu, shown in Figure 18 by going to Main Menu > System
Configuration > Display Configuration.
2. Select the Video Output to configure camera order for.
3. Select the Screen Configuration you would like to use in Live Feed. The preview of the screen
configuration on the right will change depending on the option selected.
4. Each display in the preview of the screen configuration will have a selection box containing a list
of the different cameras that are available on the DVR.
5. Pressing the up and down button of each selection box, select the camera you would like to show
in the particular display. Selecting 'X' will disable the display.
6. Click the Previous and Next button to go to the next set of displays for the selected screen
configuration. For example, in 2x2 screen configuration mode, pressing the Next button will
bring up the next set of 4 displays.
7. Click the Save button to save settings.
8. Repeat steps 2-6 to adjust the camera order for other video outputs.
9. Click the Exit button to exit out of the menu.
Figure 18 Camera Order Setting
30
Advertisement
Table of Contents
