Table of Contents
Advertisement
User's Manual of DS-7300HFI-ST Series DVR
1. Enter the User Settings menu, shown in Figure 42 by going to Main Menu > System
Configuration > User Settings.
2.
Select a user to edit in the Users List panel.
Edit user information in the Users and Remote Permissions panel. Remote permissions are
3.
defined above in Adding a New Remote User on page 54.
4. Click the Done button to exit menu.
Note:
You can modify the password of Administrator in User setting menu.
Note:
User password can be both numbers and characters. You can click the button
editable fields to enter characters.
Switch User
On the main menu (see in Figure 43), information about users are show on the lower left corner,
Configuring PTZ Cameras
Configuring Basic PTZ Settings
Settings for a PTZ camera must be configured before it can be used. Before proceeding, verify that the
PTZ and RS-485 of the DVR are connected properly.
To configure PTZ settings:
1. Enter the PTZ Configuration menu, shown in Figure 44 by going to Main Menu > System
Configuration > PTZ Configuration.
Figure 43 Main Menu
, click
to switch users.
on the password
56
Advertisement
Table of Contents
