Playing Back Multiple Channels; Playing Back Pictures - HIKVISION DS-7300HFI-ST Series User Manual

User's Manual of DS-7300HFI-ST Series DVR
5. In full-screen mode, you may hide the toolbars by clicking the Hide Toolbar button. Clicking the
Exit Full-Screen button will return you to the original playback mode.
6. Click the Enable/Disable Audio button to turn on and off audio during playback.
7. Click the Digital Zoom button to enable digital zoom. Once enabled, the regular recorded feed
will be shown in the lower right corner while the zoomed in view will be shown on the full
screen. The zoomed in region may be changed by moving the red rectangle in the regular
recorded feed window.
8. Click the Exit button to return to the previous menu.

Playing Back Multiple Channels

You may also playback recordings from multiple channels simultaneously. To playback recordings from
multiple channels:
1. Search and select recording to playback in the Playback Interface.
2. Enter into Full-Screen mode, shown in Figure 32 by clicking the Full-Screen button.
3. In Full-Screen mode, you may select additional channels to playback by clicking the checkbox
next to the desired camera in the Channel Selector panel. Playback will begin simultaneously on
the selected channels.
4. You may stop playback on any of the channels by un-checking the checkbox next to the channel.
Note: Up to 4 channels can be played back at the same time.

Playing Back Pictures

Search and view captured pictures stored in HDD.
1. Enter the Picture Playback interface, shown in Figure 33 by going to Main Menu > Playback >
Picture Playback.
2. Select channel, picture type for Normal, Event or All, start time and stop time.
3. Click the search button and the pictures found will be listed in Result interface shown in right
side.
4. Click the picture you want to view and it will be display on the bottom of left side.
5. Click to control Picture Playback.
Figure 33 Picture Playback Interface
45