User's Manual of DS-7300HFI-ST Series DVR
HDD Management
Up to 12 disks (4 SATA hard disks and 8 network disks) and 1 eSATA disk can be connected.
Each SATA hard disks and network disks with a maximum of 4TB storage capacity.
Recording, Capture and playback
Holiday recording schedule configuration.
Cycle and non-cycle recording mode.
Normal and event video encoding parameters.
8 recording periods with separated recording types configurable.
Pre-record and post-record for alarm, motion detection for recording, and pre-record time for
schedule.
Searching record files.
Customization tags, searching and playing back by tags.
Locking and unlocking record files.
Searching and playing back record files by channel number, recording type, start time, end time, etc.
Smart search for the motion event when playing back.
Zooming in when playback.
Supports pause, speed up, speed down, skip forward, and skip backward when playback, locating by
dragging the mouse.
Up to 16-ch synchronous playback.
Continuous capture of video images and playback of captured pictures.
Backup
Export video data by USB, or eSATA device.
Export video clips when playback.
Management and maintenance of backup devices.
Alarm and Exception
Alarm for video loss, motion detection, tampering, HDD Full, HDD Error, Network Disconnected,
IP Conflict, Illegal Login, Video Exception, Video Output Standard Mismatch, Recording Exception,
etc.
Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and
alarm output.
Automatic restore when system is abnormal.
Other Local Functions
Users can operate device by front panel, mouse, remote control, and control keyboard.
Three-level user management; admin user can create many operating accounts and define their
operating permissions, which includes the limit to access any channel.
Operation, alarm and exception logs recording and searching.
Import and export device configuration information.
Network
1self-adaptive 10M/100M network interfaces.
IPv6 is supported.
TCP/IP protocol, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS and iSCSI are supported.
TCP, UDP and RTP for unicast.
Remote search, playback, download, locking and unlocking the record files, and downloading files
broken transfer resume.
Remote parameters setup; remote import/export of device parameters.
9