Deleting A User; Editing A User - HIKVISION DS-7300HFI-ST Series User Manual

User's Manual of DS-7300HFI-ST Series DVR
4. Set the operation permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.
Local Configuration:

Local Log Search: Searching and viewing logs and system information of DVR.

Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.

Local Advanced Operation: Operating HDD management, upgrading system firmware,
clearing I/O alarm output.

Local Shutdown Reboot: Shutting down or rebooting the DVR.
Remote Configuration:

Remote Log Search: Remotely viewing logs that are saved on the DVR.

Remote Parameters Settings: Remotely configuring parameters, restoring factory default
parameters and importing/exporting configuration files.

Remote Video Output Control: Sending remote button control signal.

Two-Way Audio: Realizing two-way radio between the remote client and the DVR.

Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote
client) and controlling the alarm output.

Remote Advanced Operation: remotely operating HDD management, upgrading system
firmware, clearing I/O alarm output.

Remote Shutdown/Reboot: Remotely shutting down or rebooting the DVR.
Camera Configuration:

Local Video Export: Locally exporting recorded files of the selected camera (s).

Local Playback: Locally playing back recorded files of the selected camera (s).

Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).

Remote Live View: Remotely viewing live video of the selected camera (s).

Remote Playback: Remotely playing back recorded files of the selected camera (s).

Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).
5. Click the Save button to save the parameters.
Note:
For Camera Configuration, you can click
users associating with certain channels.
Note:
If you forget the password to your DVR, contact your supplier with the serial number of your DVR to
obtain a secure code to reset your DVR.
Note:
User settings only appear on the list of System Configuration when login with Administrator accounts.

Deleting a User

To delete a user from the DVR:
1. Enter the User Settings menu, shown in Figure 42 by going to Main Menu > System
Configuration > User Settings.
2. Select a user to delete in the Users List panel.
3. Click the Remove button to delete user.
Click the OK button to confirm deletion of user.
4.
5. Click the Done button to exit menu.

Editing a User

To edit a user:
to assign different local or remote permissions to different
55