Saving documents
3.3
Scanning and saving the data (Scan to HDD)
Scan data can be saved in an HDD box on the machine's internal hard disk.
The following procedures describe operations that must be performed and
the settings that must be specified when touching a single button to save a
document.
Available functions/parameters
Touch [Quality & Reduction] or [Menu] in the screen that appears after the
[Fax/Scan] key in the control panel is pressed, and then specify settings for
the following functions/parameters when saving the scanned document.
Note
The following Quality & Reduction parameters have no effect, even if
settings have been specified.
- "Reduction" on the Reduction/Area tab
Quality/Reduction screen
Parameter
Quality
Density
Reduc-
tion/Area
Note
The following Menu functions and parameters have no effect, even if
settings have been specified.
- "TSI" on the Setting 1 tab
- "Rotation TX" on the Setting 1 tab
- "Subject Selection" on the Network tab
- "Reply Address" on the Network tab
VarioLink 2221/2821/3621
Description
Select the scanning resolution (amount of details).
Specify the density for scanning.
Original
Select the desired standard size for the area to be
Size Set.
scanned.
3
Page
Reference
p. 3-11
p. 3-13
p. 3-14
3-7