Specifying The Deleting Method For [Del.] In Input Screens (Mode 478) - Oce VarioLink 2221 User Manual

6

Specifying the deleting method for [Del.] in input screens (mode 478)

Specify the deleting method for [Del.] in input screens.
Select whether the character at the cursor's position or the character to the
left of the cursor is deleted.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7
6, 5, 4, 3, 2,
1, 0
Note
North American model default setting: 1
Other model default setting: 0
6-34
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specify the deleting 0
method for [Del.] in
input screens.
1
----------------------- 0000000
Control Panel Settings
Description
Deletes the character at
the cursor's position
Deletes the character to
the left of the cursor
*Do not change these bits
when specifying settings
for this function.
VarioLink 2221/2821/3621
Page
Reference
----------
----------