Specifying settings using Web Connection
6
Type in the new password, and then click [Apply].
–
For confirmation, type in the new password twice.
–
If no password is to be specified for the user box, click the [Apply]
button without entering a password.
–
If bit 4 of mode 469 is set to "1" in the Soft SW Setting screen, a
password that does not meet the password rules (contains 7 or less
characters or consists of the same character repeated) cannot be
specified. Specify a password that meets the password rules. For
details on specifying the software switch settings, refer to
"Specifying software switch settings (machine functions)" on
page 6-22.
VarioLink 2221/2821/3621
7
7-59