Control Panel Settings
Verifying the integrity of files saved on the hard disk during startup
(mode 430)
The integrity of files saved on the hard disk is verified when the machine is
turned on.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7, 6
5
4, 3, 2, 1, 0
Note
If bit 5 of mode 430 is set to "1" in the Soft SW Setting screen, it may take
some time until the initial screen appears when the machine is turned on
if many files have been saved in the boxes.
VarioLink 2221/2821/3621
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description
----------
Specify whether or not an
operation is performed at
startup to verify the integrity
of files saved on the hard
disk.
----------
Setting
Description
*
00
Do not change these
bits when specifying set-
tings for this function.
0
Does not verify the integ-
rity
1
Verifies the integrity
00000
*Do not change these
bits when specifying set-
tings for this function.
6
Page
Reference
----------
----------
----------
6-29