3
6
Specify the name of the document to
be saved. Type in the document
name, and then ouch [Enter].
–
Up to 16 characters can be
entered.
–
Be sure to enter the document
name.
7
Select whether or not a copy will also
be printed when the data is saved. To
print a copy, touch [ON].
8
Touch [Enter].
The Copy mode screen appears
again. If a Box function was set,
[Save in User Box] appears selected.
9
Specify the necessary copy settings.
–
For details on the copy settings, refer to the User manual [Copy
Operations].
–
For details on printing a document saved in a box, refer to "Printing
documents" on page 4-3.
–
For details on routing a document saved in a box, refer to "Routing
documents" on page 5-3.
10
Press the [Start] key in the control panel.
–
If "ON" was selected in the Print screen, the data for the document
is saved in the specified box, and the scanned document is printed.
–
If "OFF" was selected in the Print screen, the data for the scanned
document is saved in the specified box.
3-6
Saving documents
VarioLink 2221/2821/3621