Basic copy operations
3.3.3
Scanning the original in separate batches ("Separate Scan" setting)
A large original can be divided and scanned in a number of batches.
A maximum of 100 original pages can be loaded into the ADF at one time. However, by specitying the
"Separate Scan" setting, an original that exceeds 100 pages can be scanned and treated as a single copy
job. In addition, the scanning location can be switched between the original glass and the ADF during the
scanning operation.
0
The loading capacity of the ADF is 100 sheets of plain paper (80 g/m
(210 g/m
0
The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".
As a default, "Batch Print" is selected.
0
For details on the output method used with the "Separate Scan" setting, refer to the description for
"Separate Scan Output Method" in "Copier Settings" on page 12-18.
1
Position the original to be copied.
–
For details on positioning the original, refer to "Feeding the original" on page 3-8.
2
In the Basic screen, touch [Separate Scan].
–
To cancel the "Separate Scan" setting, touch [Separate Scan] again to deselect it.
CS193/CS173/CS163
2
).
2
) or 38 sheets of thick paper
3
3-11