Copying A One-Touch Recipient - Oce VarioLink 2221 User Manual

Control Panel Settings

Copying a one-touch recipient

1
Perform steps 1 through 4 of the procedure "Programming a one-touch
dial button".
2
Touch the button for the one-touch recipient to be copied.
3
Touch [One-Touch], and then touch
[One-Touch Copy].
4
Touch the button where the one-
touch recipient is to be copied.
– Select a one-touch recipient
button where no settings have
already been registered.
– To deselect the one-touch dial
button where the information is to
be copied to, touch the selected
one-touch dial button again.
5
Touch [Enter] in each screen until the first screen appears.
VarioLink 2221/2821/3621
6
6-9