To Change A Software Switch Setting - Oce VarioLink 2221 User Manual

Hide thumbs Also See for VarioLink 2221:
Table of Contents

Advertisement

6

To change a software switch setting

1
After entering Administrator mode, touch [Admin. 2].
For details on entering to Administrator mode, perform steps 1
through 3 of "Deleting confidential documents" on page 6-10.
2
Touch [Software SW].
3
Touch [Mode Selection], and then
use the keypad to type in the mode
number.
4
Touch either [Bit Selection] or [HEX
Selection], and then specify the
setting.
To specify the bits, touch [Bit
Selection], move the cursor to the
bit to be changed, press either
the [0] or the [1] key in the keypad
to specify the bit, and then touch
[Set].
6-24
Control Panel Settings
VarioLink 2221/2821/3621

Advertisement

Table of Contents
loading

This manual is also suitable for:

Variolink 2821Variolink 3621

Table of Contents