Managing Data Saved On The Hard Disk; Deleting All Data - Oce VarioLink 2221 User Manual

6
6.4

Managing data saved on the hard disk

Data saved on the hard disk can be deleted and a locking password can be
specified.

Deleting all data

All data saved on the hard disk can be deleted.
0 If the "Overwrite All Data" parameter is selected, all programmed and
specified settings are reset to their defaults, and all data saved on the
hard disk is erased. Since the machine may not operate correctly after all
data is erased, perform this operation when disposing of the machine. Do
not perform this operation in any other circumstances.
0 About 35 hours is required to completely delete all data.
0 Wait at least two minutes after turning on the machine before deleting all
of the data.
1
Press the [Utility/Counter] key.
2
Touch [Admin. Management].
3
Type in the administrator code, and then touch [Enter].
4
Touch [Admin. 2], and then touch
[HDD Management].
5
Touch [Overwrite All Data].
6-12
Control Panel Settings
VarioLink 2221/2821/3621