Specifying Settings For The Image In The Failed Transmission Report (Mode 023) - Oce VarioLink 2221 User Manual

Control Panel Settings
Specifying settings for the image in the failed transmission report
(mode 023)
Specify whether or not an image of the transmitted document is added to the
failed transmission report.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7, 6, 5, 4
3
2, 1, 0
VarioLink 2221/2821/3621
7 6 5 4 3 2 1 0
1 1 1 1 1 0 0 0 (HEX: F8)
Description Setting
----------------------- 1111
Specifies whether or 0
not an image of the
1
transmitted docu-
ment is added to the
failed transmission
report.
----------------------- 000
Description
*Do not change these bits
when specifying settings
for this function.
Is not added
Is added
*Do not change these bits
when specifying settings
for this function.
6
Page
Reference
----------
----------
----------
6-27