Oce VarioLink 2221 User Manual page 67

Printing documents
– Print: Select whether a single-sided or double-sided copy is to be
printed.
– [Change Settings]: Sort, staple and punch settings can be
specified.
– [Print]: Touch to print with the specified settings.
8
To specify sort or staple settings, touch [Change Settings].
A screen appears, allowing you to change the settings.
9
Select the desired sort, staple and
punch settings.
– If staple or punch settings were
specified, touch [Position Setting]
to specify the position of the
binding margin.
– We recommend that "Auto" be
selected for the position.
– The staple settings are available
only if the optional finisher is
installed.
– The punch settings are available
only if the optional finisher and
punch unit are installed.
– The "Crease" setting is available
only if the optional finisher and
saddle stitcher are installed.
10
Check the document information, and then touch [Print].
The document is printed.
11
Touch [OK] when the confirmation message appears.
VarioLink 2221/2821/3621
4
4-9