SECTION 5—FRONT RIGGINGS
Installing/Removing Lift-Off footrest
NOTE: For this procedure, refer to FIGURE 5.2.
Installing
1. Insert the footrest assembly mounting pin into the mounting tube of the wheelchair
frame.
2. Repeat STEP 1 for the other footrest assembly.
3. If necessary, adjust the footrest height. Refer to Adjusting Footrest Height on page 37.
Removing
1. Push the footrest release lever inward and lift footrest upward.
2. Repeat STEP 1 for opposite side, if necessary.
Mounting Pin
Footrest Release Lever
Wheelchair Frame
Mounting Tube
Compass™XE and Allegro®
FIGURE 5.2 Installing/Removing Lift-Off footrest
Footrest Assembly
Footplate
NOTE: Only 60° Footrest
shown for clarity. Others will
attach the same way.
36
Part No 1127114