Invacare Compass XE Owner's Operator And Maintenance Manual page 100

SECTION 9—CASTERS
7. Release the detent pin of the quick‐release caster headtube cap and pull on the fork to
make sure the fork is securely attached to the wheelchair.
8. Reinstall the two spacers and caster onto the quick‐release caster fork.
9. Repeat this procedure for the opposite side.
DETAIL "A"
Caster Fork Stem
Compass™XE and Allegro®
Quick-Release
Approximately
¼ inches
Washers
Caster
Headtube
*NOTE: Reference Front Seat‐to‐Floor Height
Settings ‐ Spacer on Bottom on page 129 and/or
Front Seat‐to‐Floor Height Settings ‐ Spacer on
Top on page 131.
FIGURE 9.5 Installing Quick-Release Casters
Dust Cover
Locknut
Washers
*Spacer
Hex Screw
100
Quick-Release
Caster
Headtube Cap
Detent Pin
Caster
Headtube
Fork
Fork Stem
Part No 1127114