Troubleshooting - Invacare Compass XE Owner's Operator And Maintenance Manual

❑ Clean upholstery and armrests.
❑ Ensure sealed bearings and axle nut tension are correct.
❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Ensure wheel locks are easy to engage.
❑ Ensure clean quick‐release axles with a Teflon
❑ Ensure axles are free from dirt, lint, etc.
❑ Ensure roller bearings are free from dirt, lint, etc.
❑ Adjust wheel locks as tires wear.
❑ Clean and wax all parts.
❑ Check that all labels are present and legible. Replace if necessary.

Troubleshooting

X X
X X
X X
Part No 1127114
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
X If pneumatic tires, check for correct and equal pressure.
X X Check for loose stem nuts/bolts.
Check that casters contact ground at the same time.
33
® lubricant.
SOLUTIONS
Compass™XE and Allegro®