Installing/Removing Lift-Off Footrest; Installing; Removing; Adjusting Footrest Height - Invacare Solara Spree GT Owner's Operator And Maintenance Manual

SECTION 6—FRONT RIGGINGS

Installing/Removing Lift-Off Footrest

NOTE: For this procedure, refer to FIGURE 6.2.

Installing

1. Insert the footrest assembly mounting pins into the mounting tube of the wheelchair
frame.
2. Repeat STEP 1 for the other footrest assembly.
3. If necessary, adjust the footrest height. Refer to Adjusting Footrest Height on page 34.

Removing

1. Push the footrest release lever inward and lift footrest upward.
2. Repeat STEP 1 for opposite side, if necessary.
Footrest Release Lever
Mounting Tube
Wheelchair Frame
FIGURE 6.2 Installing/Removing Swingaway Footrest

Adjusting Footrest Height

Height Adjustment Ranges

FOOTREST TYPE
NOTE: If using ANY type of extension with the adjustable flip-up footplate. Refer to Adjusting
Adjustable Angle Flip-Up Footplates on page 36.
® ™
Solara /Spree GT
Mounting Pin
60°
70°
90°
90°
Footrest Assembly
Footplate
NOTE: Only 60° Footrest
shown for clarity. Others will
attach the same way.
ADJUSTMENT RANGE
13-17-inches
13-17-inches
5-8-inches
5-11-inches (with 3-inch extension)
34
Part No 1125027