Write-Protecting and Write-Enabling Cartridges
Each DLT cartridge has a write-protect switch 1 and an orange protection
tab 2. Use the switch as follows:
1. To write-protect a cartridge (prevent data from being written onto the
tape), move the switch to the left. The orange tab appears.
2. To write-enable a cartridge (allow data to be written), move the switch
to the right. The orange tab disappears.
NOTE: When write-protected, the cartridge can only be read by the library; it cannot be
written to or erased.
Figure F-4. Write-protecting a cartridge
Figure Legend
2
1
Table F-6
Write-Protecting a Cartridge
Description
1
Write-protect switch
2
Orange protection tab
Tape Drives and Cartridges F-13
SHR-1728