Throttle Cable Adjustment; Throttle Lubrication - Yamaha YZ85( P) /LC Owner's Service Manual

Hide thumbs Also See for YZ85( P) /LC:
Table of Contents

Advertisement

THROTTLE CABLE ADJUSTMENT/

THROTTLE LUBRICATION

5PA30110
5PA30120
5PA30130
5PA30140
3 - 10
EC35A001
THROTTLE CABLE ADJUSTMENT
1. Check:
Throttle grip free play a
Out of specification
Throttle grip free play a:
3 ~ 5 mm (0.12 ~ 0.20 in)
2. Adjust:
Throttle grip free play
Throttle grip free play adjustment steps:
Loosen the locknut 1.
Turn the adjuster 2 until the specified free
play is obtained.
Tighten the locknut.
NOTE:
Before adjusting the throttle cable free play,
the engine idle speed should be adjusted.
WARNING
After adjusting, turn the handlebar to
right and left and make sure that the
engine idling does not run faster.
THROTTLE LUBRICATION
1. Remove:
Throttle cable cap 1
2. Apply:
Lithium soap base grease
On the throttle cable end a and tube guide
cable winding portion b.
3. Install:
Throttle grip cap
1 Nm (0.1 m · kg, 0.7 ft · lb)
INSP
ADJ
Adjust.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents