Configuring The Maximum Number Of Ecmp Routes; Configuring Ospf Preference - HP 6125XLG Configuration Manual

Step
1. Enter system view.
2. Enter OSPF view.
3. Configure a bandwidth
reference value.

Configuring the maximum number of ECMP routes

Perform this task to implement load sharing over ECMP routes.
To configure the maximum number of ECMP routes:
Step
1. Enter system view.
2. Enter OSPF view.
3. Configure the maximum
number of ECMP routes.

Configuring OSPF preference

A router can run multiple routing protocols, and each protocol is assigned a preference. If multiple routes
are available to the same destination, the one with the highest protocol preference is selected as the best
route.
To configure OSPF preference:
Step
1. Enter system view.
2. Enter OSPF view.
3. Configure a
preference for OSPF.
Command
system-view
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
bandwidth-reference value
Command
system-view
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
maximum load-balancing maximum
Command
system-view
ospf [ process-id | router-id router-id
| vpn-instance vpn-instance-name ] *
preference [ ase ] [ route-policy
route-policy-name ] value
65
Remarks
N/A
N/A
The default setting is 100
Mbps.
Remarks
N/A
N/A
By default, the
maximum number of
ECMP routes is the
same as that configured
in the max-ecmp-num
command. For more
information about the
max-ecmp-num
command, see IP
Routing Command
Reference.
Remarks
N/A
N/A
By default, the preference of OSPF
internal routes is 10 and the preference
of OSPF external routes is 150.