Displaying And Maintaining Bgp - HP 6125XLG Configuration Manual

Step
2. Enter BGP view or BGP-VPN
instance view.
3. Enable BFD to detect the link to the
specified BGP peer.
To enable BFD for a BGP peer (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enable BFD to detect the link to the
specified IPv6 BGP peer.

Displaying and maintaining BGP

Execute display commands in any view and reset commands in user view (IPv4).
Task
Display BGP IPv4 unicast peer group
information.
Display BGP IPv4 unicast peer or peer
group information.
Display BGP IPv4 unicast routing
information.
Display BGP IPv4 unicast route
advertisement information.
Display BGP IPv4 unicast routing
information sent to/received from the
specified BGP peer.
Display BGP IPv4 unicast routing statistics.
Command
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance vpn-instance-name
peer ip-address bfd
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance vpn-instance-name
peer ipv6-address bfd
Command
display bgp group ipv4 [ unicast ] [ vpn-instance
vpn-instance-name ] [ group-name ]
display bgp peer ipv4 [ unicast ] [ vpn-instance
vpn-instance-name ] [ ip-address { log-info | verbose } |
group-name log-info | verbose ]
display bgp routing-table ipv4 [ unicast ] [ vpn-instance
vpn-instance-name ] [ network-address [ { mask | mask-length }
[ longest-match ] ] ]
display bgp routing-table ipv4 [ unicast ] [ vpn-instance
vpn-instance-name ] network-address [ mask | mask-length ]
advertise-info
display bgp routing-table ipv4 [ unicast ] [ vpn-instance
vpn-instance-name ] peer ip-address { advertised-routes |
received-routes } [ network-address [ mask | mask-length ] |
statistic ]
display bgp routing-table ipv4 [ unicast ] [ vpn-instance
vpn-instance-name ] statistic
223
Remarks
N/A
By default, BFD is
not enabled.
Remarks
N/A
N/A
By default, BFD is
not enabled.