HP 6125XLG Configuration Manual page 27

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

IPv4 Session Working Under Ctrl Mode:
LD/RD
SourceAddr
4/7
1.1.1.9
The output shows that the BFD session has been created.
# Display the static routes on Switch A.
<SwitchA> display ip routing-table protocol static
Summary Count : 1
Static Routing table Status : <Active>
Summary Count : 1
Destination/Mask
120.1.1.0/24
Static Routing table Status : <Inactive>
Summary Count : 0
The output shows that Switch A communicates with Switch B through VLAN-interface 10. Then the link
over VLAN-interface 10 fails.
# Display static routes on Switch A.
<SwitchA> display ip routing-table protocol static
Summary Count : 1
Static Routing table Status : <Active>
Summary Count : 1
Destination/Mask
120.1.1.0/24
Static Routing table Status : <Inactive>
Summary Count : 0
The output shows that Switch A communicates with Switch B through VLAN-interface 1 1.
DestAddr
2.2.2.9
Proto
Pre
Cost
Static 60
0
Proto
Pre
Cost
Static 65
0
16
State
Holdtime
Up
2000ms
NextHop
Interface
12.1.1.2
Vlan10
NextHop
Interface
10.1.1.100
Vlan11
Interface
Loop1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents