Configuring Ospf Route Redistribution - HP 6125XLG Configuration Manual

--- 10.4.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms

Configuring OSPF route redistribution

Network requirements
Enable OSPF on all the switches.
•
Split the AS into three areas.
•
Configure Switch A and Switch B as ABRs.
•
• Configure Switch C as an ASBR to redistribute external routes (static routes).
Figure 21 Network diagram
Configuration procedure
1. Configure IP addresses for interfaces. (Details not shown.)
2. Enable OSPF (see
3. Configure OSPF to redistribute routes:
# On Switch C, configure a static route destined for network 3.1.2.0/24.
<SwitchC> system-view
[SwitchC] ip route-static 3.1.2.1 24 10.4.1.2
# On Switch C, configure OSPF to redistribute static routes.
[SwitchC] ospf 1
[SwitchC-ospf-1] import-route static
Verifying the configuration
# Display the ABR/ASBR information of Switch D.
<SwitchD> display ospf abr-asbr
Type
Intra
"Configuring basic
OSPF Process 1 with Router ID 10.5.1.1
Routing Table to ABR and ASBR
Destination
10.3.1.1
OSPF").
Area Cost
0.0.0.2 10
84
Nexthop RtType
10.3.1.1 ABR