Packet Type-Based Interface Pbr Configuration Example; Network Requirements; Configuration Procedure - HP 6125XLG Configuration Manual

Task
Display PBR configuration.
Display interface PBR configuration and
statistics (centralized devices).
Display interface PBR configuration and
statistics (distributed devices–centralized IRF
devices–in standalone mode).
Display interface PBR configuration and
statistics (distributed devices–in IRF mode).
Clear PBR statistics.
Packet type-based interface PBR configuration
example

Network requirements

As shown in
1 1 to the next hop 1.1.2.2. Switch A forwards other packets according to the routing table.
Figure 70 Network diagram

Configuration procedure

1. Configure Switch A:
# Configure ACL 3101 to match TCP packets.
Figure 70, configure PBR on Switch A to forward all TCP packets received on VLAN-interface
Command
display ip policy-based-route setup
display ip policy-based-route interface interface-type
interface-number
display ip policy-based-route interface interface-type
interface-number [ slot slot-number ]
display ip policy-based-route interface interface-type
interface-number [ chassis chassis-number slot slot-number ]
reset ip policy-based-route statistics [ policy policy-name ]
271