HP 6125XLG Configuration Manual page 201

Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv4 unicast
instance view or BGP-VPN
IPv4 unicast instance view.
4. Configure BGP route
reception filtering policies.
To configure BGP route reception filtering policies (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
ipv4-family [ unicast ]
•
Reference an ACL or IP prefix list to
filter routes from all peers:
filter-policy { acl-number | prefix-list
prefix-list-name } import
•
Reference a routing policy to filter
routing information from a peer or
peer group:
peer { group-name | ip-address }
route-policy route-policy-name
import
•
Reference an ACL to filter routing
information from a peer or peer
group:
peer { group-name | ip-address }
filter-policy acl-number import
•
Reference an AS path list to filter
routing information from a peer or
peer group:
peer { group-name | ip-address }
as-path-acl as-path-acl-number
import
•
Reference an IPv4 prefix list to filter
routing information from a peer or
peer group:
peer { group-name | ip-address }
prefix-list prefix-list-name import
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
190
Remarks
N/A
N/A
N/A
Use at least one method.
By default, no route reception
filtering is configured.
Remarks
N/A
N/A