Controlling Route Distribution And Reception - HP 6125XLG Configuration Manual

Only active routes can be redistributed. To view route state information, use the display ip routing-table
protocol or display ipv6 routing-table protocol command.
The ORIGIN attribute of BGP routes redistributed from IGPs is INCOMPLETE.
To configure BGP to redistribute IGP routes (IPv4):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv4 unicast
instance view or BGP-VPN
IPv4 unicast instance view.
4. Enable route redistribution
from the specified IGP into
BGP.
5. (Optional.) Enable default
route redistribution into BGP.
To configure BGP to redistribute IGP routes (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv6 unicast
instance view or BGP-VPN
IPv6 unicast instance view.
4. Enable route redistribution
from the specified IGP into
BGP.
5. (Optional.) Enable default
route redistribution into BGP.

Controlling route distribution and reception

This section describes how to control route distribution and reception.
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
ipv4-family [ unicast ]
import-route protocol [ { process-id
| all-processes } [ med med-value |
route-policy route-policy-name ] * ]
default-route imported
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
ipv6-family [ unicast ]
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
default-route imported
182
Remarks
N/A
N/A
N/A
By default, BGP does not
redistribute IGP routes.
By default, BGP does not
redistribute default routes.
Remarks
N/A
N/A
N/A
By default, BGP does not
redistribute IGP routes.
By default, BGP does not
redistribute default routes.