HP 6125XLG Configuration Manual page 229

Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv4 unicast
instance view or BGP-VPN
IPv4 unicast instance view.
4. Advertise the COMMUNITY
or extended community
attribute to a peer or peer
group.
5. (Optional.) Apply a routing
policy to routes advertised to
a peer or peer group.
To configure BGP community (IPv6):
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP IPv6 unicast
instance view.
4. Advertise the COMMUNITY
or extended community
attribute to a peer or peer
group.
5. (Optional.) Apply a routing
policy to routes advertised to
a peer or peer group.
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
ipv4-family [ unicast ]
•
Advertise the COMMUNITY
attribute to a peer or peer
group:
peer { group-name |
ip-address }
advertise-community
•
Advertise the extended
community attribute to a peer
or peer group:
peer { group-name |
ip-address }
advertise-ext-community
peer { group-name | ip-address }
route-policy route-policy-name
export
Command
system-view
bgp as-number
ipv6-family [ unicast ]
•
Advertise the COMMUNITY
attribute to a peer or peer
group:
peer { group-name |
ipv6-address }
advertise-community
•
Advertise the extended
community attribute to a peer
or peer group:
peer { group-name |
ipv6-address }
advertise-ext-community
peer { group-name |
ipv6-address } route-policy
route-policy-name export
218
Remarks
N/A
N/A
N/A
By default, the COMMUNITY or
extended community attribute is
not advertised.
By default, no routing policy is
applied.
Remarks
N/A
N/A
N/A
By default, the COMMUNITY or
extended community attribute is
not advertised.
By default, no routing policy is
applied.