HP 6125XLG Configuration Manual page 187

Step
2. Enter BGP view or BGP-VPN
instance view.
3. Create an EBGP peer group.
4. Specify the AS number for the
group.
5. Add a peer into the EBGP
peer group.
6. (Optional.) Configure a
description for a peer group.
7. Create and enter BGP IPv4
unicast instance view or
BGP-VPN IPv4 unicast
instance view.
8. Enable the router to exchange
IPv4 unicast routing
information with peers in the
specified peer group.
To configure an EBGP peer group by using Method 1 (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Create an EBGP peer group.
4. Specify the AS number for the
group.
Command
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
group group-name external
peer group-name as-number
as-number
peer ip-address group group-name
[ as-number as-number ]
peer group-name description
description-text
ipv4-family [ unicast ]
peer group-name enable
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
group group-name external
peer group-name as-number
as-number
176
Remarks
N/A
By default, no EBGP peer group is
created.
By default, no AS number is
specified.
If a peer group contains peers, you
cannot remove or change its AS
number.
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer group-name
as-number as-number command.
By default, no description is
configured for the peer group.
By default, the BGP IPv4 unicast
instance view and BGP-VPN IPv4
unicast instance view are not
created.
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.
Remarks
N/A
N/A
By default, no EBGP peer group is
created.
By default, no AS number is
specified.
If a peer group contains peers, you
cannot remove or change its AS
number.