Configuring Ripng Route Control; Configuring An Additional Routing Metric; Configuring Ripng Route Summarization - HP 6125XLG Configuration Manual

Step
4. Enter interface view.
5. Enable RIPng on the interface.

Configuring RIPng route control

Before you configure RIPng, complete the following tasks:
Configure IPv6 addresses for interfaces to ensure IPv6 connectivity between neighboring nodes.
•
• Configure basic RIPng.

Configuring an additional routing metric

An additional routing metric (hop count) can be added to the metric of an inbound or outbound RIPng
route.
An outbound additional metric is added to the metric of a sent route, and it does not change the route's
metric in the routing table.
An inbound additional metric is added to the metric of a received route before the route is added into the
routing table, and the route's metric is changed.
To configure an inbound or outbound additional routing metric:
Step
1. Enter system view.
2. Enter interface view.
3. Specify an inbound
additional routing metric.
4. Specify an outbound
additional routing metric.

Configuring RIPng route summarization

Configure route summarization on an interface, so RIPng advertises a summary route based on the
longest match.
RIPng route summarization improves network scalability, reduces routing table size, and increases
routing table lookup efficiency.
For example, RIPng has two specific routes to be advertised through an interface: 1:1 1:1 1::24 with a metric
of a 2 and 1:1 1:12::34 with a metric of 3. Configure route summarization on the interface, so RIPng
advertises a single route 1 1::0/16 with a metric of 2.
To configure RIPng route summarization:
Command
interface interface-type
interface-number
ripng process-id enable
Command
system-view
interface interface-type interface-number
ripng metricin value
ripng metricout value
288
Remarks
N/A
By default, RIPng is disabled.
If RIPng is not enabled on an
interface, the interface does not send
or receive any RIPng route.
Remarks
N/A
N/A
The default setting is 0.
The default setting is 1.