Defining A Continue Clause - HP 6125G Configuration Manual

Step
6. Set a cost for routing
information.
7. Set a cost type for routing
information.
8. Set the extended community
attribute for BGP routing.
9. Set the next hop.
10. Set the local preference for
BGP routing information.
11. Set the ORIGIN attribute for
BGP routing information.
12. Set the preference for the
routing protocol.
13. Set a preferred value for BGP
routing information.
14. Set a tag value for RIP, or OSPF
routing information.
The difference between IPv4 and IPv6 apply clauses is the command for setting the next hop for routing
information.

Defining a continue clause

Follow these guidelines when you define a continue clause:
If you configure the same type of apply clauses that set different values (including the apply
•
community and apply extcommunity clauses with the additive keyword) on nodes that are
combined by the continue clause, the apply clause configured on the last matching node takes
effect.
If you configure the apply community clause for multiple nodes that are combined by the continue
•
clause, the apply comm-list delete clause configured on the current node cannot delete the
COMMUNITY attributes of preceding nodes.
To define a continue clause:
Command
apply cost [ + | - ] value
apply cost-type [ internal | type-1 |
type-2 ]
apply extcommunity { { rt
route-target }&<1-16> [ additive ] }
•
Set the next hop for IPv4 routes:
apply ip-address next-hop
ip-address
•
Set the next hop for IPv6 routes:
apply ipv6 next-hop
ipv6-address
apply local-preference preference
apply origin { egp as-number | igp
| incomplete }
apply preference preference
apply preferred-value
preferred-value
apply tag value
260
Remarks
Optional.
Not set by default.
Optional.
Not set by default.
Optional.
Not set by default.
Optional.
Not set by default.
The setting does not apply to
redistributed routing information.
The apply ip-address next-hop
and apply ipv6 next-hop
commands do not apply to
redistributed IPv4 and IPv6
routes.
Optional.
Not set by default.
Optional.
Not set by default.
Optional.
Not set by default.
Optional.
Not set by default.
Optional.
Not set by default.